Watkins Wellness 74427 Circulation Pump
Please be aware that certain brands and products are not eligible for Leisure Time Inc. discounts, including the WELCOME code. These items are only discounted during manufacturer-authorized sales. The list of excluded products is subject to change, and we reserve the right to adjust it as needed. It’s important to note that limitations are set by the manufacturers, who have the discretion to determine which products are excluded from discounts.
Brands:
- Gozney
- OHCO
- Positive Posture
- Nomadix
Product Exclusions:
- Any product that already has a price markdown.
- FreshWater Salt System Replacement Cartridge (3 Pack)
- FreshWater Salt System Replacement Cartridge
- Route Protection Insurance
- Bullfrog A / R / X Series 10-00282 Filter Cartridges
- Bullfrog STIL Series 10-00281 Filter Cartridges
- FROG® @ease Sanitizer System for Bullfrog Spas
- FROG® @ease Replacement Cartridge for Bullfrog Spas (3 Pack)
- Bullfrog Simplicity™ Flat Filters for M Series (4 Pack)
- Filter Core Cage & Cap Assembly for Bullfrog Spas
- Fireplaces
- Electric Fireplaces
- Gas Vent Pipe
- Pellet Vent Pipe
- Fireplace Fronts
Watkins Wellness 74427 Circulation Pump
Overview
Watkins Wellness Replacement Circulation pump replaces all Caldera & Hot Spring Spas Circulation Pump From 2002 To Current.
What's in the Box
- 1 x Watkins Wellness 74427 Circulation Pump
Specifications
- 115V
- 50-60HZ 3/4" Barb
- 5-1/2" Length
- 5" Tall
Compatibility
- Please reach out to our customer support team and they will be able to verify if this part fits your model.
Directions
Circulation Pump Removal Instructions:
- Disconnect power to the spa.
- Access the equipment compartment.
- Unplug the circulation pump from the control box.
- If the spa is filled with water, clamp the circulation pump inlet and outlet tubing with Hose Clamp Pliers.
- Remove the bonding wire and base bracket screws.
- Using Spring Clamp Pliers, slide the spring clamps located on the inlet and outlet fittings back onto the vinyl tubing.
- Remove the vinyl tubing from the pump inlet and outlet fittings.
- Disconnect the electrical cord for the old pump. Take note of the electrical hookup.
Circulation Pump Installation:
- Install the electrical cord onto the new pump.
- Reverse steps 3 to 7 of the Circulation Pump Removal instructions.
- Check for water leaks.
- Reconnect power to the spa.
- Perform a water flow test. (1 GALLON WITH 20 SECONDS)
- Check for any air in the plumbing lines. If air does not clear, bleed off the air at the closest tubing clamp.
- Reinstall the equipment compartment door.
Brand
Watkins Wellness®
Warranty
Leisure Time Inc. does not offer or provide warranties on any of the products we sell.
Many of the products available through Leisure Time Inc. are covered by manufacturer warranties, which are provided and administered directly by the product manufacturer. These warranties vary by brand and product type.
Leisure Time Inc. is happy to assist customers in facilitating warranty claims with the manufacturer, but all warranty approvals, denials, and service decisions are made solely by the manufacturer.
Leisure Time Inc. does not offer in-house warranties and will not replace, repair, or otherwise honor any warranty that has been voided by the manufacturer.
Customer-Installed Parts Policy
All hot tub and fireplace parts must be installed by a certified technician in order to maintain the manufacturer’s warranty.
Any part that is installed by the customer or a non-certified individual will void the manufacturer’s warranty. In the event that a customer-installed part becomes defective or fails — even within the warranty period — the manufacturer is not obligated to repair or replace the product under warranty.
Leisure Time Inc. will not accept returns, exchanges, or warranty claims on any parts that have been installed by the customer or an unqualified installer.
