Watkins Wellness 74427 Circulation Pump
Please be aware that certain brands and products are not eligible for Leisure Time Inc. discounts, including the LT10 code. These items are only discounted during manufacturer-authorized sales. The list of excluded products is subject to change, and we reserve the right to adjust it as needed. It’s important to note that these limitations are set by the manufacturers, who have the discretion to determine which products are excluded from discounts.
Brands:
- Gozney
- OHCO
- Positive Posture
- FreshWater Salt System Replacement Cartridge (3 Pack)
- FreshWater Salt System Replacement Cartridge
- Route Protection Insurance
Watkins Wellness 74427 Circulation Pump
Overview
Watkins Wellness Replacement Circulation pump replaces all Caldera & Hot Spring Spas Circulation Pump From 2002 To Current.
What's in the Box
- 1 x Watkins Wellness 74427 Circulation Pump
Specifications
- 115V
- 50-60HZ 3/4" Barb
- 5-1/2" Length
- 5" Tall
Directions
Circulation Pump Removal Instructions:
- Disconnect power to the spa.
- Access the equipment compartment.
- Unplug the circulation pump from the control box.
- If the spa is filled with water, clamp the circulation pump inlet and outlet tubing with Hose Clamp Pliers.
- Remove the bonding wire and base bracket screws.
- Using Spring Clamp Pliers, slide the spring clamps located on the inlet and outlet fittings back onto the vinyl tubing.
- Remove the vinyl tubing from the pump inlet and outlet fittings.
- Disconnect the electrical cord for the old pump. Take note of the electrical hookup.
Circulation Pump Installation:
- Install the electrical cord onto the new pump.
- Reverse steps 3 to 7 of the Circulation Pump Removal instructions.
- Check for water leaks.
- Reconnect power to the spa.
- Perform a water flow test. (1 GALLON WITH 20 SECONDS)
- Check for any air in the plumbing lines. If air does not clear, bleed off the air at the closest tubing clamp.
- Reinstall the equipment compartment door.
Brand
Watkins Wellness®