Rutland Grapho-Glas Stove Gasket
Please be aware that certain brands and products are not eligible for Leisure Time Inc. discounts, including the LT10 code. These items are only discounted during manufacturer-authorized sales. The list of excluded products is subject to change, and we reserve the right to adjust it as needed. It’s important to note that these limitations are set by the manufacturers, who have the discretion to determine which products are excluded from discounts.
Brands:
- Gozney
- OHCO
- Positive Posture
- FreshWater Salt System Replacement Cartridge (3 Pack)
- FreshWater Salt System Replacement Cartridge
- Route Protection Insurance
Rutland Grapho-Glas Stove Gasket
Overview
RUTLAND Grapho-Glas® Replacement Stove Gaskets are engineered to provide superior sealing, protection, and longevity when compared to other materials. The graphite-impregnated fiberglass resists creosote and soot adhesion that, in turn, provides better abrasion resistance. The braiding of the gasket and the staying power of RUTLAND adhesive cements combine to make sure this gasket lasts much longer without failing or coming off.
All of this makes Grapho-Glas® Gaskets the best choice for replacing your stove's gasket. So good, in fact, that many stove manufacturers use Grapho-Glas® as standard equipment on their stoves and fireplaces.
What’s in the Box
- 1 x Rutland Grapho-Glas Stove Gasket
Specifications
- 5', 6', or 7' lengths in the following widths and types: 1/4" rope, 3/8" rope, 1/2" rope, 5/8 x 3/16" tape, 3/4" rope, and 7/8" rope
- Black
- Rated up to 1000°F (530°C)
Directions
We recommend wearing protective gloves and eyewear. Working with a cold stove, remove all old gasketing and adhesive from the channel of your stove door or window. For the adhesive to adhere properly, you must clean to bare metal in the gasket channel. Lightly dampen the gasket and the gasket channel in the stove door.
- Knead Tube Before Use.
- Cut tip on angle. Apply a 1/8″ bead of cement into gasket channel, then press the gasket firmly into the channel adhering to cement.
- Close the door to create a crease in excess gasket.
- Open door and trim excess gasket at crease. Leave the door open and allow to air dry for one hour.
- Be sure to heat cure within 30 days.
Brand
Rutland®