Rutland 600F RTV High Heat Silicone Sealant
$24.99
Rutland 600F RTV High Heat Silicone Sealant
Please be aware that certain brands and products are not eligible for Leisure Time Inc. discounts, including the LT10 code. These items are only discounted during manufacturer-authorized sales. The list of excluded products is subject to change, and we reserve the right to adjust it as needed. It’s important to note that these limitations are set by the manufacturers, who have the discretion to determine which products are excluded from discounts.
Brands:
- Gozney
- OHCO
- Positive Posture
- FreshWater Salt System Replacement Cartridge (3 Pack)
- FreshWater Salt System Replacement Cartridge
- Route Protection Insurance
Rutland 600F RTV High Heat Silicone Sealant
Overview
RUTLAND High Heat Silicone Sealant is a great solution for sealant needs. Not only is this a powerful adhesive, it will also seal gases and smoke permanently, with limitless uses in the home or on job sites. Use it to seal fireplace inserts, repair solar panels, or apply ceramic tiles to your fireplace surround or heat shielding behind your stove. Can also be used to seal a chimney cap to withstand wind, rain, and hot smoke.
RUTLAND 600ºF RTV High Heat Silicone Sealant is a great solution for sealant needs. Not only is this a powerful adhesive, it will also seal gases and smoke permanently, with limitless uses in the home or on job sites. Use it to seal fireplace inserts, repair solar panels, or apply ceramic tiles to your fireplace surround or heat shielding behind your stove. Can also be used to seal a chimney cap to withstand wind, rain, and hot smoke.
Silicone will adhere to most clean surfaces, including glass, metal, plastics, fiberglass, wood, brick, and stone.
What’s in the Box
- 1 x Rutland 600F RTV High Heat Silicone Sealant
Specifications
- 10.3 oz. Cartridge (both Red and Black)
- Remains flexible in temperatures up to 600°F intermittently or 550°F continuously
- No harsh odor
- Approximate coverage: 65' with 3/16" bead
- Indoor and outdoor use
- Made in the USA
Directions
We recommend wearing protective gloves and eyewear. Working with a cold stove, remove all old gasketing and adhesive from the channel of your stove door or window. For the adhesive to adhere properly, you must clean to bare metal in the gasket channel. Lightly dampen the gasket and the gasket channel in the stove door.
- Knead Tube Before Use.
- Cut tip on angle.
- Apply a 1/8″ bead of cement into gasket channel, then press the gasket firmly into the channel adhering to cement.
- Close the door to create a crease in excess gasket.
- Open door and trim excess gasket at crease.
- Leave the door open and allow to air dry for one hour.
- Be sure to heat cure within 30 days.
Brand
Rutland®
