SpaPure Salt Start | Salt for Spa Salt Systems

• 1 x SpaPure Salt Start (5 lb container, granular salt blend)

• Spa-grade salt for SCGs — establishes the salinity your salt system needs to generate chlorine
• More than salt — a blend with water-softening ingredients for easier-to-maintain water
• Works with all salt systems — compatible with every brand of salt chlorine generator
• Prevents stains and scale — the softening additives help protect surfaces and equipment
• Extends salt cell life — clean, purpose-built salt reduces wear on the cell
• Silky water — creates the soft, pleasant feel salt-water spa owners love

SpaPure Salt Start is for spas equipped with a salt chlorine generator, and it works with all brands of salt system. It's specifically the startup/maintenance salt for that setup — it isn't a sanitizer or balancer on its own; it's the raw material your generator turns into sanitizer.

It works alongside the rest of your routine: balance pH and total alkalinity before and during salt startup, use salt test strips (and your generator's own readout) to confirm salinity, and keep up your pH balancers and stain & scale protection as usual. Always check your spa or salt-system operator's manual for the exact salinity target, since it varies by system.A salt chlorine generator makes chlorine through electrolysis: dissolved salt (sodium chloride) passes over the cell's electrodes, and the electrical current splits it into pure chlorine that sanitizes the water on demand. After the chlorine does its job, it reverts back to salt — so the salt is continually reused rather than consumed. That's why you "charge" the water with salt once and only top it up occasionally.

Salt Start supplies that salt at spa-grade purity, plus softening ingredients that keep dissolved minerals from depositing as scale on the cell and surfaces. Because the salt level directly drives how much chlorine the cell can produce, getting it to the generator's target ppm is what makes the whole system run correctly.

Pro Tip: Add salt gradually and test as you go — you can always add more, but you can't remove it without draining. Salinity is stable once set (the salt is recycled, not used up), so add part of the calculated amount, let it dissolve and circulate, test, and work up to your generator's target. Overshooting means diluting with fresh water to bring it back down.

Always confirm your system's target salinity before dosing — requirements vary by generator. For reference, 1 dry measuring cup = 2 pounds.

1. Review the operator's manual of your spa or salt chlorine generator for the total amount of salt needed, in parts-per-million (ppm), for the device to operate correctly.
2. Calculate the total amount of product needed using the dosing charts on the label for your spa's gallons and target ppm.
3. With the pump running, slowly add the product directly to the spa water.
4. Brush any unsettled material off the surfaces so it dissolves rather than resting on the shell.
5. Check salt (salinity) levels once a month and top up as needed.

Pro Tip: Balance and dissolve before you switch the generator on. Make sure the salt is fully dissolved and your salinity reads in range before relying on the cell to produce chlorine — running a generator before the salt is dissolved gives a false low reading and can have you adding more than you actually need.

• Brand: SpaPure
• Manufacturer: Haviland Consumer Products
• Part Number: C007100-CS6X5
• Product Type: Spa salt blend for salt chlorine generators (startup & maintenance salt)
• Form: Granular salt blend (salt + water-softening ingredients)
• Net Weight: 5 lb
• Function: Establishes salinity for salt chlorine generation; softens water; helps prevent stains and scale
• Measure Conversion: 1 dry measuring cup = 2 lb
• Dosing: Per your generator's target ppm and the label's charts (varies by system and spa size)
• Monitoring: Check salinity monthly with salt test strips or the generator's readout
• Compatibility: All brands of salt chlorine generator
• Benefits: Extends salt cell life; reduces spa upkeep; silky water feel
• Application Note: Add slowly with the pump running; brush unsettled material off surfaces; ensure full dissolution before relying on the generator
• Shipping: Standard ground (eligible for mail return under standard policy)

SpaPure Salt Start is for spas equipped with a salt chlorine generator, and it works with all brands of salt system. It's specifically the startup/maintenance salt for that setup — it isn't a sanitizer or balancer on its own; it's the raw material your generator turns into sanitizer.

It works alongside the rest of your routine: balance pH and total alkalinity before and during salt startup, use salt test strips (and your generator's own readout) to confirm salinity, and keep up your pH balancers and stain & scale protection as usual. Always check your spa or salt-system operator's manual for the exact salinity target, since it varies by system.