SpaPure EZ-Enzyme + PhosAway | Enzyme & Phosphate

• 1 x SpaPure EZ-Enzyme + PhosAway (1 pint / 16 fl oz, liquid)

• 2-in-1 formula — combines a natural enzyme cleaner with a phosphate remover
• SpaPure's strongest enzyme — the most concentrated enzyme formula in the line
• Eliminates waterline rings — digests the oils and waste that cause scum buildup
• Lowers phosphates — protects salt chlorine generator (SCG) efficiency
• Keeps filters cleaner — less buildup means fewer cartridge cleanings
• Helps hold pH stable — maintains steadier balance for longer between adjustments
• Non-foaming — compatible with all sanitizing and oxidizing systems

The formula works on two fronts at once. The enzymes — biological catalysts that digest organic matter — break down the oils, lotions, and bather waste in the water into simpler compounds, so that greasy film never gets a chance to coat your shell or clog the filter. Like all enzymes, they work best in the warm water of a spa, where they're most active.

The PhosAway component binds to dissolved phosphates and converts them into a form your filter can remove. That's why the water may briefly turn cloudy or hazy after a phosphate treatment — that haze is the bound phosphate being pulled out of solution, and it clears as the filter does its work. Once filtered out, those phosphates can no longer feed cloudiness or starve your salt cell.

Pro Tip: Cloudiness or a little foam after dosing isn't a problem — it's the product working. The enzyme and phosphate action briefly lifts material into the water before the filter catches it, so a short bout of haze (or light foam) is your sign it's doing its job. Give it 24–48 hours and let the filter clear it, then rinse the filter to flush the captured phosphates out.

Never mix different products together in the same bottle or pail. Shake before using. Add this product directly to the spa water with the pump circulating at the lowest setting. Keep pH (7.2–7.4) and alkalinity (80–150 ppm) balanced.

Initial Treatment

1. Apply 1 ounce per 100 gallons of water, pouring directly into the spa with the pump running.

Weekly Maintenance

1. Apply 1 to 2 ounces per 500 gallons of water weekly to keep filters and water clean.

Phosphate Reduction

1. If phosphate levels exceed 1,000 ppb, add 8 ounces per 500 gallons directly to the spa with the pump running (swim spas, double the dose).
2. If the water becomes cloudy or hazy, that's normal — it clears as the filter removes the suspended particles.
3. After 48 hours, rinse the filter to remove the captured phosphates from the water.
4. Retest phosphate levels after one week and retreat if necessary.

After application, avoid superchlorinating (shocking) the water for 24 hours to ensure maximum effectiveness. Rinse filters about once a month with regular use.

Pro Tip: Don't skip the filter rinse after a phosphate treatment. The PhosAway binds phosphates onto the filter, so if you don't rinse the cartridge afterward, you're leaving the captured phosphates sitting in the system. A quick rinse at the 48-hour mark is what actually removes them from your water for good.

• Brand: SpaPure
• Manufacturer: Haviland Consumer Products
• Part Number: C007101-CS40P
• Product Type: 2-in-1 enzyme cleaner + phosphate remover
• Form: Concentrated liquid (SpaPure's strongest enzyme concentration)
• Net Size: 1 pint (16 fl oz)
• Functions: Digests oils/waste, eliminates waterline rings, keeps filters clean, helps stabilize pH, lowers phosphates
• Initial Dosage: 1 oz per 100 gallons
• Weekly Dosage: 1–2 oz per 500 gallons
• Phosphate Treatment: 8 oz per 500 gallons if phosphates exceed 1,000 ppb (double for swim spas)
• After Phosphate Dose: Rinse filter after 48 hours; retest phosphates after one week
• Timing: Do not superchlorinate/shock for 24 hours after application
• Performance: Enzyme activity is enhanced in warm spa water
• Properties: Non-foaming; concentrated
• Compatible Sanitizers: All sanitizing and oxidizing systems — chlorine, bromine, salt/SCG, mineral, and biguanide
• Application Note: Shake before use; never mix with other products in the same container; add directly to spa water with the pump running
• Shipping: Standard ground; not classified as a hazardous material (eligible for mail return under standard policy)

SpaPure EZ-Enzyme + PhosAway is compatible with all sanitizing and oxidizing systems — chlorine, bromine, salt/SCG, mineral, and biguanide. It's an especially smart choice for salt water spas, where keeping phosphates low directly protects salt cell performance.

Think of it as the upgraded enzyme option: where Natural Clear is the pure weekly enzyme cleaner, EZ-Enzyme + PhosAway adds phosphate removal to the same enzyme benefits. One important timing note: avoid superchlorinating (shocking) for 24 hours after application, since a high chlorine level breaks the enzyme down before it can finish working. Never mix it with other products in the same bottle or pail; add it directly to the spa water.