SpaGuard Brominating Concentrate | Spa Bromine

Available in three sizes — choose your size at checkout:

• 1 x SpaGuard Brominating Concentrate — 14 oz (resealable bottle, granular)
• 1 x SpaGuard Brominating Concentrate — 2 lb (resealable bottle, granular)
• 1 x SpaGuard Brominating Concentrate — 6 lb (resealable bottle, granular)

Note: All three sizes are the identical formula — only the bottle quantity differs. Brominating Concentrate is your primary sanitizer for a bromine spa. Keep the bottle tightly sealed and store it in a cool, dry place away from other chemicals.

• One-step sanitizer and shock — sanitizes and oxidizes in a single product; no need for two.
• Fast-dissolving granules — dissolve quickly and completely.
• No cloudy residue — dissolves without leaving insoluble residue, for pristine clear water.
• Controls bacteria and clarifies — keeps water clean, safe, and clear.
• No pre-dissolving needed — add it directly to the spa with the pump running.
• Doubles as a super-oxidizer — can be used as a shock treatment to remove organic wastes.

Bromine sanitizes by attacking and destroying bacteria and other microorganisms, along with the organic contaminants bathers leave behind. SpaGuard Brominating Concentrate combines two ingredients to do this efficiently: a bromide salt and an oxidizer that activates it. When added to the water, the oxidizer converts the bromide into active bromine — the working sanitizer — which then gets to work keeping the water safe and clear.

This two-in-one action is what makes it a one-step product: the same chemistry that sanitizes also oxidizes organic waste, so a single addition both protects and clarifies the water. Because it dissolves cleanly and completely, it does this without clouding the water. Used at a higher dose, it acts as a super-oxidation (shock) treatment, burning off accumulated organic wastes and refreshing the water.

Pro Tip: Maintain a bromine residual of 3–6 ppm for properly sanitized water, and build it gradually — add a measured dose, wait 15–20 minutes, and retest rather than dumping in a large amount at once. Sneaking up on your target keeps the water comfortable and avoids overshooting.

Routine Maintenance

1. Apply 1 teaspoon per 200 gallons every 15–20 minutes to reach a bromine residual of 3–6 ppm.
2. Test regularly to determine the frequency of additional doses.
3. Add as needed to maintain 3–6 ppm.

Super Oxidation

1. Add 4 teaspoons per 200 gallons.
2. May be needed nightly in a heavily used spa, or as infrequently as once a week in a moderately used spa.

Treatment of Visible Algae

1. Brush the spa surfaces.
2. Start the circulation system operating without air injection (if possible).
3. Add 4 teaspoons per 200 gallons of water.
4. Allow the system to circulate for 15–20 minutes.
5. Treatment may be repeated in 24 hours if algae are still present.

Pro Tip: Always add the product with the pump running and the spa not in use, and wait until your bromine level returns to a safe range before getting in. Test before re-entry — especially after a super-oxidation dose.

• Product: SpaGuard Brominating Concentrate — Spa Sanitizer & Oxidizer
• Brand: SpaGuard (BioGuard family)
• Available Sizes: 14 oz, 2 lb, and 6 lb
• SKUs: Per-variant — confirm from backend
• Form: Granular — fast-dissolving, no pre-dissolving required
• Chemical Type: One-step bromine sanitizer and oxidizer
• Functions: Sanitizer, oxidizer, and clarifier in one
• Active Ingredients: Sodium Dichloro-s-Triazinetrione 82.5%, Sodium Bromide 14.7%
• Other Ingredients: 2.8%
• Target Bromine Residual: 3–6 ppm
• Routine Dose: 1 tsp per 200 gallons, repeated every 15–20 min to target
• Super Oxidation Dose: 4 tsp per 200 gallons
• Algae Treatment: 4 tsp per 200 gallons; circulate 15–20 min; may repeat in 24 hours
• Sanitizer Compatibility: Bromine sanitizing systems
• Surface Compatibility: Safe for all common spa surfaces
• Country of Origin: Made in USA
• Shipping: Ships UPS Ground only
• Hazmat Classification: Brominating product — classified as a hazardous material; ships ground only

• Bromine spas — this is your primary bromine sanitizer.
• All spa surfaces — safe for use with all common spa surfaces.

Important: Brominating Concentrate is formulated for bromine sanitizing systems. Maintain a bromine residual of 3–6 ppm and keep your water balanced (pH and alkalinity in range) for the sanitizer to work its best. If you run a chlorine spa instead, SpaGuard Chlorinating Concentrate is the chlorine-side equivalent.