Spa Marvel X10 Water Filter | Hose Pre-Fill Filter

• 1 × Spa Marvel X10 Water Filter — hose-end inline filter with endcaps

• Filters water before it enters your spa or pool — a cleaner starting point for every fill
• Screws onto any standard garden hose — no installation, no tools, no plumbing changes
• Treats up to 10,000 gallons — covers many fills before replacement
• Reduces the contaminants that cause problems — cleaner fill water means less staining, scale, and chemical demand
• Multipurpose — also filters drinking water for RVs and boats, pets and livestock, and fish ponds or aquariums
• Simple to use — flush, connect, and fill
• Reusable — keep it on hand for every drain-and-refill

The X10 is an inline filter: water flows through the filtration media inside the housing on its way from the hose to your spa, reducing the impurities it carries before they ever reach the water. Instead of treating problems after they show up in the tub, you're keeping a portion of them out of the water in the first place.

Here's how it fits into a fill:

1. The garden hose is flushed to clear out anything sitting in the line
2. The X10 is connected to the hose end and briefly flushed to prime the media
3. Water passes through the filter as you fill, leaving contaminants behind in the media
4. Filtered water enters the spa or pool — a cleaner baseline for your water chemistry
5. The endcaps go back on for storage, keeping the media moist and ready for next time

Because it works at a controlled flow rate, filling through the X10 takes a little longer than an open hose — that's the trade-off for letting the media do its job. Over its life it treats up to 10,000 gallons, which spans many spa fills or a long season of other uses.

Pro Tip: The X10 pays off most when your fill water needs it — well water and hard or discolored municipal water carry the metals and minerals behind staining and scale. Filtering those out at the hose means less stain-and-scale treatment and fewer surprises after a refill.

Operating Range

• Working pressure: 20–100 PSI (138–689 kPa)
• Maximum flow rate: 2 GPM (7.6 LPM)
• Temperature range: 35°–100°F (2°–38°C)

Setup & Use

1. Before use, flush the garden hose to remove contaminants from the line.
2. Connect the X10 Water Filter to the garden hose and flush for 60 seconds to prime it.
3. Fill your spa, pool, or container through the filter.
4. Replace the endcaps when not in use. Do not allow the X10 to dry out or freeze.

Care & Storage

• Keep the media moist — install the endcaps between uses
• Protect from freezing — store somewhere temperatures stay above freezing
• Stay within the operating range — don't exceed 100 PSI or the maximum flow rate

Pro Tip: Filling through the X10 is slower by design — the 2 GPM maximum flow is what gives the media time to work. Plan for a longer fill, and don't try to force it by cranking the pressure past 100 PSI; that won't speed things up and can damage the filter.

• Brand: Spa Marvel®
• SKU: SP10
• Product Type: Hose-end inline water filter (pre-fill filtration)
• Connection: Standard garden hose thread
• Capacity: Treats up to 10,000 gallons
• Working Pressure: 20–100 PSI (138–689 kPa)
• Maximum Flow Rate: 2 GPM (7.6 LPM)
• Temperature Range: 35°–100°F (2°–38°C)
• Function: Filters fill water before it enters a spa, pool, or container
• Also Suitable For: RV and boat drinking water, pets and livestock, fish ponds and aquariums
• Care: Keep media moist; replace endcaps when not in use; do not allow to dry out or freeze
• Companion Products: Spa Marvel Water Treatment & Conditioner, Spa Marvel Cleanser
• Hazmat Classification: Non-hazmat — eligible for mail return per standard policy

The X10 connects to any standard garden hose, so it works anywhere you fill from a hose — regardless of your spa's brand or water care system. It treats the fill water, not the spa water, so it never interacts with your chemistry.

Use It For

• Hot tubs, spas, and swim spas — filter every fill for a cleaner start
• Pools — same hose-end filtration on a larger fill
• RVs and boats — filter drinking and tank water
• Pets and livestock — cleaner water for bowls and troughs
• Fish ponds and aquariums — filtered top-off water

Works Alongside

• Spa Marvel Water Treatment & Conditioner — start with filtered fill water, then dose the enzyme treatment; a cleaner baseline lets the system work even better
• Spa Marvel Cleanser — purge the old plumbing with Cleanser, drain, then refill through the X10 for the cleanest possible fresh fill
• Any sanitizer program — chlorine, bromine, salt, ozone, UV, and more; the X10 only treats incoming water