📦 Free shipping on orders over $50 🚚

Rutland E-Z Spread Fiberglass Stove Gasket Cement

By Rutland

Low stock

Rutland E-Z Spread Fiberglass Stove Gasket Cement


Rutland's E-Z Spread Fiberglass is a smooth, easy-to-use cement for: adhering fiberglass gasket to cast iron or steel. Made for bonding and sealing replacement stove gasketing. Bonds metal to metal and fiberglass gaskets to metal. 

Fancy Features

  • Easiest cement for affixing gasket
  • Will not expand or contract
  • 2,000 degree temperature rating

What’s in the box

  • 1 x E-Z Spread Fiberglass Tube 3oz

Directions for Use

*Wear protective gloves and eyewear*

*Make sure that the surface to be cemented is cool and cleaned of all dirt, rust, and residue* 

  1. Knead the tube before use.
  2. Cut the tube tip to the desired opening.
  3. Dampen the area with water and apply minimum amount of cement required into gasket channel, then press the gasket firmly into the cement. 
  4. Close the door to help ensure a good seal, then trim the excess gasket. 
  5. Allow the product to air dry for 1 hour with the door open.
  6. Within 30 days, start a fire and gradually increase the heat to 500 degrees to cure. 

Clean Up

  1. Wipe up the excess cement with a wet cloth immediately.
  2. Once the product is dried and the heat cured, cement can be removed by sanding, scraping, or sand blasting. For interior use only. 



Most products purchased from our online shop within the last 30 days can be returned.

The following items are non-returnable:

  • Gift cards
  • Electronics
  • Pumps / Motors
Take 10% off your first order with code LT10.