GLB Triple Tab Chlorinating Tablets - 10 lb.
Please be aware that certain brands and products are not eligible for Leisure Time Inc. discounts, including the LT10 code. These items are only discounted during manufacturer-authorized sales. The list of excluded products is subject to change, and we reserve the right to adjust it as needed. It’s important to note that these limitations are set by the manufacturers, who have the discretion to determine which products are excluded from discounts.
Brands:
- Gozney
- OHCO
- Positive Posture
- FreshWater Salt System Replacement Cartridge (3 Pack)
- FreshWater Salt System Replacement Cartridge
- Route Protection Insurance
GLB Triple Tab Chlorinating Tablets - 10 lb.
Overview
What’s in the Box
- 1 x GLB Triple Tab Chlorinating Tablets - 10 lb.
Ingredients
- Trichloro-s-Triazinetrione: 93.5%
- Copper Sulfate Pentahydrate: 1.5%
- Other Ingredients: 5%
- Available Chlorine: 84%
Directions
Routine Chlorination:
- Add one tablet per 10,000 gallons of pool water every week or as often as needed to maintain a chlorine residual at 1.0 to 4.0 ppm. This dosage may vary depending upon bather load, water temperature and other conditions. Pool should not be entered until the chlorine residual is 1€“4 ppm as measured with a reliable test kit.
Shock Treatment:
- As a preventative treatment, you should shock treat your pool once per week to prevent pool problems. In addition to weekly shock treatment, you should shock treat to remedy problems which may occur when bathing loads are high, water appears hazy or dull, unpleasant odors or eye irritation occur, after heavy wind and rainstorms, or if algae does develop with resulting green color and slimy feeling. Adjust pH to 7.2 to 7.4 with GLB pH Up or GLB pH Down per label directions. Shock treat weekly with a product such as GLB Oxy-Brite non-chlorine shock oxidizer, GLB Shoxidizer shock oxidizer or GLB SuperSonic to kill bacteria, control algae, burn out organic material and to keep water sparkling clear. Follow label directions.
Algae Control:
- If pool surface develops algae or feels slippery, follow shock treatment directions. Immediately after shock treatment, thoroughly clean pool by scrubbing surface of algae growth, vacuum and cycle through filter. If necessary, repeat the procedure. Pool should not be entered until the chlorine residual is 1-4 ppm.
Brand
GLB®