BioGuard Balance Pak 300

BioGuard Balance Pak 300

Overview

BioGuard Balance Pak 300 is a calcium hardness increaser. This product boosts calcium hardness to help prevent equipment corrosion, etching of plaster, and wrinkling of liners. It has a unique palletized formulation which means faster dissolving and less cloudiness. Low calcium hardness can cause staining, etching, or distorting of the pool's finish. Plaster etched by low calcium hardness will become abrasive and uncomfortable for swimmers. Rough plaster also increases algae problems and makes cleaning more difficult. It is important to keep your pool water balanced in order to get the most effective use out of your chemicals.

What's in the Box 

• 1 x BioGuard Balance Pak 300

Features

• Granular calcium chloride.
• For raising calcium hardness.
• Inhibits corrosion of pool equipment and surfaces.

Directions For Use

• Calcium Hardness in pool water should be maintained in the 175-275 ppm range. Never allow calcium hardness to remain below 100 ppm. Add this product directly to pool water by scattering it over the water surface. Do not pre dissolve this treatment as heat is generated when this product contacts water. Use a surface compatible brush to brush away undissolved granules off the pool surface. The addition of 4 lbs. of this product per 10,000 gallons of water will raise calcium hardness by approximately 40 ppm. The addition of 10 lbs. of this product per 10,000 gallons of water will raise calcium hardness by approximately 100 ppm.
• 1 lb. per 10,000 will raise calcium hardness 10 ppm.

Brand 

BioGuard ®