Pool Frog Chlorine Pac 540c

Pool Frog Chlorine Pac 540c

$80.95

Pool Frog Chlorine Pac 540c

By FROG
SKU: 01-03-5613
$80.95

This product is available for in-store pickup only and cannot be shipped.

To confirm availability for pickup at your nearest location, give us a call at (208) 973-1384 or email us at hello@leisuretimeinc.com.

Check Discount Eligibility
Returns On Hazardous Materials
Low stock
Description

Pool Frog Chlorine Pac 540c

Overview

Pool Frog 6.16 pound chlorine Pac works with the Pool Frog XL Pro to easily chlorinate your pool without need to actually touch the chlorine tablets. Simply remove the tab and insert into the cycler, then adjust the cycler to dial in the correct amount of chlorine for your pool. The 6.16 lb. Chlorine Pac lasts 2-3 weeks depending on pool usage. Bac-Pac containers are recyclable when empty.

Features

  • The 6.16 lb. Bac Pacs of chlorine last 2-3 weeks depending on pool usage.
  • Chlorine Pac containers are recyclable when empty.
  • Easy to use with no need to touch the chlorine.

Directions

  1. Adjust pH level to 7.2 - 7.8.
  2. Bring Free Available Chlorine (FAC) residual to 1.0 ppm using a chlorine shock. Follow Manufacturer's Label Directions.
  3. Stabilize the pool with cyanuric acid stabilizer. Follow Manufacturer's Label Directions.
  4. To install pac: Take POOL FROG Chlorine Cycler cap off. Remove pac cut offs. Hold pac so the open end faces down. Insert into POOL FROG Chlorine Cycler. The end of the pac must align with the key located inside the POOL FROG Chlorine Cycler at the bot-tom. DO NOT FORCE. Replace cycler cap and set the control dial per the size and pump run time of your pool according to the chart in the manual included with the POOL FROG Mineral Reservoir. Monitor chlorine level dall for the first week to determine correct dial setting. Turn the control dial to the next higher setting to increase the FAC and turn it to the next lower setting to decrease the FAC. Check the FAC residual with FROG® Test Strips and increase/decrease one setting per day until you achieve at least 0.5 ppm. Do not enter the pool until the chlorine residual is at least 0.5 ppm.
  5. Once you have determined the proper setting for your pool, you do not have to re-adjust the setting under normal conditions. If conditions change (i.e. weather, rain, pool use, bather load, etc.) the control dial can be easily adjusted to increase or decrease the chlorine feed.
  6. Super chlorinate if needed. Do not add shock treatment to the skimmer. Turn control dial to Minimum or Setting #O before super chlorinating. Once desired FAC has been obtained, return the control dial to the normal operating setting.
  7. Periodically check the pac and replace with a new one when empty. Do not attempt to open or refill this pac. DO NOT REUSE.

Brand

FROG®

Most products purchased from our online shop within the last 30 days are eligible for return. Please review our return policy to see the list of items that cannot be returned.

Some major items that are non-returnable:

  • Gift cards
  • Electronics
  • Pumps / Motors
  • Hot Tubs
  • Closeouts
  • See return policy below for made-to-order/special-order return eligibility.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)