Natural Chemistry Stain Free Extra Strength
$45.99
Natural Chemistry Stain Free Extra Strength
Please be aware that certain brands and products are not eligible for Leisure Time Inc. discounts, including the LT10 code. These items are only discounted during manufacturer-authorized sales. The list of excluded products is subject to change, and we reserve the right to adjust it as needed. It’s important to note that these limitations are set by the manufacturers, who have the discretion to determine which products are excluded from discounts.
Brands:
- Gozney
- OHCO
- Positive Posture
- FreshWater Salt System Replacement Cartridge (3 Pack)
- FreshWater Salt System Replacement Cartridge
- Route Protection Insurance
Due to Department of Transportation (DOT) regulations, we cannot accept returns on products classified as hazardous materials via return shipping to our warehouse. However, in-store returns for these items are acceptable. This policy ensures the safety and compliance of all shipping and handling procedures. If you have questions regarding your purchase or believe you have received a defective product, please contact our customer service team for assistance.
To view items that are non-returnable due to being labeled a hazardous material, click here: Non-returnables
Natural Chemistry Stain Free Extra Strength
Overview
What’s in the Box
- 1 x Natural Chemistry Stain Free Extra Strength
Directions
*Note: Balance pool water chemistry before using Stain Free Extra Strength. Stain removal products work best when the pH is on the lower end of acceptable range (7.2).
Surface Staining
- If the surface is stained, add 1 pound of Stain Free Extra Strength per 10,000 gallons as close to the stained areas as possible with the pump off overnight.
Water Discoloration
If the entire body of water is discolored, put the pool on recirculate, add 1 pound of Stain Free Extra Strength per 10,000 gallons to the pool evenly around the edge. Let circulation run for one hour. After one hour, shut the pump off and let sit overnight.
- Before turning the pump back on, brush the pool walls and floor thoroughly.
- Turn the pump back on and add METALfree to the pool water evenly around the edge of the pool at a rate of 33.9oz per 20,000 gallons.
- With the pump still on, vacuum the pool walls and floor very thoroughly.
- After vacuuming, clean filters: Sand Filter: backwash for at least 3 minutes and then rinse for 2 minutes. Cartridge Filter: clean filter and filter tank thoroughly. **DE Filter:**backwash and recharge with DE.
- Test and rebalance water. DO NOT SHOCK THE POOL FOR AT LEAST 1 WEEK.
Note: If chlorine level is low after Stain Free Extra Strength treatment, add small amounts of chlorine. Do not exceed 2ppm.
Brand
Natural Chemistry
