Rutland Furnace Cement
Please be aware that certain brands and products are not eligible for Leisure Time Inc. discounts, including the LT10 code. These items are only discounted during manufacturer-authorized sales. The list of excluded products is subject to change, and we reserve the right to adjust it as needed. It’s important to note that these limitations are set by the manufacturers, who have the discretion to determine which products are excluded from discounts.
Brands:
- Gozney
- OHCO
- Positive Posture
- FreshWater Salt System Replacement Cartridge (3 Pack)
- FreshWater Salt System Replacement Cartridge
- Route Protection Insurance
Rutland Furnace Cement
Overview
Rutland Furnace Cement is premixed and ready to use, making it one of the easiest cements to apply. Use this smooth consistency cement to bond and seal metal to metal or metal to masonry joints less than 1/8".
Rutland Furnace Cement is premixed and ready to use, making it one of the easiest cements to apply. Use this smooth consistency cement to bond and seal metal to metal or metal to masonry joints less than 1/8".
Fix a crack, seal the collar to the top of a wood stove, or seal between firebricks and prefabricated fireplace. Use this cement anywhere a quality high-temperature adhesive is required for furnaces, firebrick repair, filling gaps, sealing joints, or gluing ceramic logs. Adheres to metal, stone, and firebricks, creating a permanent smoke- and gas-tight seal.
What’s in the Box
- 1 x Rutland Furnace Cement
Features
- 8 fl oz, 16 fl oz, 32 oz Tubs and 10.3 oz Cartridge
- Black
- Rated to withstand up to 2000°F (1090°C)
- Indoor use only
- Requires heat cure
- Made in the USA
Directions
- TUB: Use on cool surfaces. Clean surface to be cemented. Dampen area lightly with water and apply cement. Immediately clean excess cement with warm water to prevent permanent etching. Air dry for at least 1 hour. Within 30 days, heat gradually to 500°F to cure. Cured cement can be removed by sanding or scraping.
- CARTRIDGE: Use on surfaces that are cool to the touch. Cut the nozzle tip at an angle to desired opening and insert into caulking gun. Clean all dirt, rust, and foreign matter from the surface to be cemented. Dampen area lightly with water and apply cement. Immediately clean excess cement with warm water to prevent permanent etching. Air dry for at least one hour. Within 30 days, heat gradually to 500°F to cure. Cured cement can be removed by sanding or scraping.
Brand
Rutland®