SpaPure Spa Cleaner | Hot Tub Surface Cleaner

• 1 x SpaPure Spa Cleaner (1 pint / 16 fl oz, liquid)

• Removes waterline rings — cuts the oily band of grime where water meets the shell
• Tackles grease, scale, and deposits — one cleaner for dirt, oils, scale, and buildup
• Won't affect water balance — safe to use whether the spa is full or empty
• Safe on spa surfaces — plastic, vinyl, fiberglass, ceramic, and painted surfaces
• Replaces several cleaners — the only surface cleaner your spa needs
• Rinses clean — no heavy foaming residue when used as directed

The formula dissolves the oils, grease, and mineral deposits that bond to your spa's surfaces, lifting waterline rings and grime so they wipe away instead of needing to be scrubbed off. For stubborn spots, letting the cleaner dwell on the surface for a few minutes gives it time to break down heavier buildup before you wipe.

Because it's designed for spa materials, it cleans without harming the shell and won't throw off your chemistry the way a household cleaner would — so a full spa stays usable and a freshly cleaned empty one is ready to refill. Use it with a soft, non-abrasive cloth, sponge, or pad so you never scratch the acrylic.

Pro Tip: The best time to clean the shell is when the spa is drained for a water change, while the surfaces are exposed. Wipe down the whole interior — especially the waterline band — before you refill, and pair it with a System Cleanse plumbing purge and a fresh or cleaned filter. That way the entire spa, inside and out, starts the new fill genuinely clean.

Apply with a damp sponge, non-abrasive cleaning pad, or similar soft, non-scratching material. Safe for use whether the spa is full or empty; application will not affect water balance.

1. Apply SpaPure Spa Cleaner to the surface or fitting being cleaned.
2. Wipe surfaces clean, or scrub gently to remove tough deposits.
3. To remove heavy stains, allow the cleaner to remain on the problem area for up to 5 minutes before scrubbing.
4. Rinse the treated surface thoroughly with water.
5. Repeat if necessary.

Avoid use on copper, aluminum, steel, or galvanized surfaces. Excessive use may cause foam, which can be controlled with a defoaming agent.

Pro Tip: Catch the waterline ring early and it wipes off in seconds. Give the shell a quick wipe at the waterline every week or two as part of your routine — once that oily band is allowed to harden and build up, it takes the dwell-and-scrub treatment to remove. A little regular upkeep beats a big cleaning job.

• Brand: SpaPure
• Manufacturer: Haviland Consumer Products
• Part Number: C003271-CS40P
• Product Type: Spa & hot tub surface cleaner
• Form: Liquid (apply with sponge or soft pad)
• Net Size: 1 pint (16 fl oz)
• Removes: Waterline rings, dirt, grease, scale, and other surface deposits
• Safe On: Plastic, vinyl, fiberglass, ceramic, and painted surfaces
• Avoid On: Copper, aluminum, steel, or galvanized surfaces
• Use When: Spa full or empty — does not affect water balance
• Heavy Stains: Let dwell up to 5 minutes before scrubbing, then rinse
• Properties: Non-toxic; biodegradable
• Note: Excessive use may cause foam, controllable with a defoamer
• System: Compatible with all spas and all sanitizer systems
• Shipping: Standard ground; not classified as a hazardous material (eligible for mail return under standard policy)

SpaPure Spa Cleaner is safe on the surfaces found in modern spas — plastic, vinyl, fiberglass, ceramic, and painted. Avoid using it on copper, aluminum, steel, or galvanized surfaces and fittings.

Because it doesn't affect water chemistry, it works alongside any sanitizer system and fits any routine. It pairs naturally with your drain-and-refill products — System Cleanse for the plumbing and Filter Cleaner for the cartridge — to clean every part of the spa at once. If heavy use of the cleaner produces foam in a full spa, that foam can be knocked down with a defoamer.