Omni Liquid Floc Plus
Please be aware that certain brands and products are not eligible for Leisure Time Inc. discounts, including the LT10 code. These items are only discounted during manufacturer-authorized sales. The list of excluded products is subject to change, and we reserve the right to adjust it as needed. It’s important to note that these limitations are set by the manufacturers, who have the discretion to determine which products are excluded from discounts.
Brands:
- Gozney
- OHCO
- Positive Posture
- FreshWater Salt System Replacement Cartridge (3 Pack)
- FreshWater Salt System Replacement Cartridge
- Route Protection Insurance
Omni Liquid Floc Plus
Overview
Quickly clears cloudy water by dropping debris to the bottom of the pool so it can be vacuumed out. This works overnight to restore clear water. This product is formulated pH neutral so it will not affect your water balance.
What’s in the Box
- 1 x Omni Liquid Floc Plus
Directions
- Check filter and backwash or clean filter if necessary.
- Adjust pH to 7.5 - 8.0 for best results.
- Remover skimmer basket and any product in the skimmer, with the pump on and filter valve in recirculate or whirlpool position. For a filter with recirculating position: backwash, then with the filter in filter position, dilute this product into a larger plastic pail of water and apply evenly over the surface of the pool. Replace the skimmer basket after applying this product.
- Allow pump to circulate water for 2 hours to distribute this product throughout the pool.
- Shut off the pump. Let this product settle debris to the bottom while the pool remains undisturbed for 12 to 24 hours (usually overnight). Note- The great the debris in the water, the faster this product works. For an extremely cloudy pool (cannot see the drain in the deep part of the pool) use double the normal dosage.
- Vacuum to waste all settled debris with the filter in waste or drain mode. Note: Settling may continue for several days if new debris is introduced by wind or rain. If so, vacuum to waste again. Do not vacuum debris through a filter.
- Backwash and clean the filter and resume the normal filter cycle.
- Check pH and readjust if needed to 7.4-7.6.
For Water with Algae:
- This product will not kill algae but facilitates the removal of dead algae after being treated. Use specific algae treatment product to kill algae. Follow the directions on the certain product you choose to treat algae.
- After the algae treatment is complete per the algae treatment's label directions, follow steps 1 through 8 as previously stated for "Cloudy Water".
Brand
Omni®
