🎉 Limited Time Offer: Free Shipping on Orders Over $75! 🚚

Caldera Spa Circulation Pump

Caldera Spa Circulation Pump


Caldera Spa Circulation Pump

SKU: 74427
$239.95 $288.05
By Caldera

Low stock

Caldera Spa Circulation Pump


Caldera Spas Replacement Circulation Pump for all models

Replaces all Caldera Spas Circulation Pump From 2002 To Current

What's in the Box

  • 1 x Caldera Spa Circulation Pump


  • 115V
  • 50-60HZ 3/4" Barb
  • 5-1/2" Length
  • 5" Tall


Circulation Pump Removal Instructions:

  1. Disconnect power to the spa.
  2. Access the equipment compartment.
  3. Unplug the circulation pump from the control box.
  4. If the spa is filled with water, clamp the circulation pump inlet and outlet tubing with Hose Clamp Pliers.
  5. Remove the bonding wire and base bracket screws.
  6. Using Spring Clamp Pliers, slide the spring clamps located on the inlet and outlet fittings back onto the vinyl tubing.
  7. Remove the vinyl tubing from the pump inlet and outlet fittings.
  8. Disconnect the electrical cord for the old pump. Take note of the electrical hookup.

Circulation Pump Installation:

  1. Install the electrical cord onto the new pump.
  2. Reverse steps 3 to 7 of the Circulation Pump Removal instructions.
  3. Check for water leaks.
  4. Reconnect power to the spa.
  5. Perform a water flow test. (1 GALLON WITH 20 SECONDS)
  6. Check for any air in the plumbing lines. If air does not clear, bleed off the air at the closest tubing clamp.
  7. Reinstall the equipment compartment door.



Most products purchased from our online shop within the last 30 days can be returned.

The following items are non-returnable:

  • Gift cards
  • Electronics
  • Pumps / Motors
  • Hot Tubs
  • Closeouts
  • See return policy below for made-to-order/special-order return eligibility.
30-day returns* Free shipping above $75

Customer Reviews

Be the first to write a review